After full charge, the battery can remain connected to the charger. When the charger is switched off, a return current of 0.12 mA can be neglected. However, it is recommended to remove the charger from the battery during extended periods of standing (during the winter) as this increases the battery life. The AIRBATT Powercharger DUO 2641 PB contains two separate chargers in a housing for lead gel, nonwoven or LiFePO4 batteries from the manufacturers AIRBATT and VISION. Maintenance-free VRLA batteries should always be fully charged, as this will extend battery life. Features: Short circuit proof, current limiter, overvoltage protection, charge control indicator.
3-stage charger for the exact charging of 2 lead gel, non-woven or LiFePO4 batteries. Plug connector Secondary: Pole clips Clip Plug system Primary: EURO-Schukokabel other countries such as USA, Australia, Switzerland, etc. available in our Shp. Dimensions: L x W x H = 100 x 60 x 48 mm Weight: 0.3 kg Applications: Reverse polarity protected, handy construction, clear displays, short circuit proof, special dryfit, AGM and LiFePO4 charging curve Characteristic: IUoU (changeover to maintenance charge after 4 hours Uo) Security: EN 60335 EMC on the network side: EN 61000 Mains voltage: 230 - 110 VAC 50-60 Hz 0.5A
Also for LiFePO4 batteries, Eg from VISION and AIRBATT energypower.
|charger for [V]:||12 V batteries|
|dimensions (lxbxh):||135 x 80 x 44 mm|
|Output voltage (DC) [V]:||14,85|
|Nominal Voltage (AC) [V]:||100 - 240|
|Reverse current [mA]:||< 1|
|charging voltage [V]:||14,85 V|
|Connection:||Tyco Pol clamps MPX Bosch Mittig = + Renk 3+ 1- Tamiya rund = - eckig = + XLR 3Pol 1+ 2-|
|Charge Current [A]:||2|
|protection class:||IP 41|
|Shipping weight:||1,50 Kg|
|Product weight:||0,50 Kg|